VersaStack for Data Center Design and Implementation Eğitimi

Ön Kayıt ve Fiyat Bilgi Formu




Tarih ve lokasyonlar


Bu eğitimi özel sınıf olarak kendi kurumunuzda talep edebilirsiniz.
Lütfen bizimle iletişime geçin:


info@bilginc.com

+90 212 282 7700

Talep Formu
Eğitim Tipi ve Süresi


Eğitim Sağlayıcı ve Kategori

Cisco  » VersaStack Eğitimler
Cisco  » VersaStack Eğitimler

VersaStack for Data Center Design and Implementation (VersaStack-ID)

Learn to configure and manage a physical VersaStack environment.

The Cisco-IBM VersaStack validated virtual data center design represents the latest converged infrastructure featuring the Cisco Unified Computing System computing, Nexus 9000, MDS and Nexus 1000V networking, IBM Storwize 7000 storage, and VMware virtualization platforms.

You will participate in planning and design activities that establish key system parameters with the end-to-end configuration and management of a physical VersaStack environment. Upon completion of the program, you will have designed and configured compute, network, storage, and virtualization platforms - emerging with a detailed, practical methodology for swift, repeatable VersaStack deployments.

What You'll Learn

  • Deploy and implement a VersaStack Solution
  • Cable physical for VersaStack direct attached storage
  • Configure Nexus 9K switches for VersaStack
  • Implement MDS 9148 switches for VersaStack
  • Configure Cisco UCS for VersaStack
  • Configure IBM Storwize V7000 for VersaStack

Who Needs to Attend

  • Network architects
  • System engineers
  • Channel partners
  • Server, network, SAN, and storage administrators

Prerequisites

There are no prerequisites for this course.

Follow-On Courses

There are no follow-ons for this course.

Course Outline

1. Review the VersaStack for Data Center Architecture

  • Reference Hardware Configuration
  • Software Revisions for Platform Components

2. VersaStack Global Configuration Guidelines

  • VersaStack VLAN and VSAN Usage
  • VMware Virtual Machine Requirements
  • Management Addressing, Device Hostname, and VLAN ID Variables
  • VersaStack Cabling and Device Connectivity

3. VersaStack System Build Process

  • VersaStack Cabling Requirements
  • Configure the Cisco Nexus 9396 Switches
  • Configure the Cisco MDS 9148S Fibre Channel Switches
  • Configure the IBM Storwize V7000 Storage
  • Configure and Provision Cisco UCS Servers
  • Configure Fibre Channel Zoning
  • Configure and Validate SAN Boot Setup
  • Configure and Administer VMware vSphere
  • Configure V7000 File Module Setup
  • Install and Configure of the Cisco Nexus 1000V

4. Configuring the Cisco Nexus 9396 Switches

  • Important Design Parameters for Successful Nexus 9000 Deployment
  • Nexus 9000 Network Initial Configuration Setup
  • Enable Nexus 9000 Features and Settings
  • Create VLANs for VersaStack Traffic
  • Configure the Virtual Port Channel Domain, Interfaces and Peer Link
  • Configure Network Interfaces Connecting to the UCS Fabric Interconnects
  • Configure In-band Management Access for Servers and Virtual Machines

5. Configuring the Cisco MDS 9148S Switches

  • Important Design Parameters for Successful MDS 9148 Deployment
  • Perform MDS 9148 Network Initial Configuration Setup
  • Enable MDS Features and Settings
  • Create VSANs and SAN Port Channel Connectivity to UCS Fabric Interconnects

6. Configuring the IBM Storwize Storage System Switches

  • Important Design Parameters for Successful Storwize V7000 Deployment
  • Secure Web Access to the Storwize V7000 Service and Management GUI
  • Perform Storwize V7000 Initial Configuration Setup

7. Configuring Cisco Unified Computing System

  • Important Design Parameters for Successful Cisco Unified Computing System Deployment
  • Perform a UCS Cluster Reset and Initialization
  • Configure Server, Uplink and Fibre Channel Interfaces
  • Configure Chassis Discovery, Enable Network Timing Protocol
  • Management IP Pool for KVM Access
  • VLANs and VSANs for LAN and SAN Connectivity
  • Server Pools
  • Resource Identity Pools (UUID, MAC, WWNNs, and WWPNs)
  • BIOS, Maintenance and Firmware Policies
  • vNIC and vHBA Templates
  • SAN Boot Policy
  • Service Profile Template
  • Service Profiles

8. Configuring Cisco MDS SAN Parameters

  • Important Design Parameters for Successful Cisco MDS SAN Deployment
  • VSANs for SAN Fabrics
  • Device Aliases for Server Initiators and Storage Targets
  • Zones to Support SAN Boot Policy
  • and Activate Zone Sets on Each Fabric

9. Configuring Fibre Channel LUNs on the Storwize Storage System

  • Important Design Parameters for Successful IBM Storwize SAN Deployment
  • Fibre Channel Boot Volumes Using the IBM Storwize V7000 GUI
  • NFS Volumes Using the IBM Storwize V7000 GUI
  • the Fibre Channel Hosts
  • Map the Boot Volume to the ESXi Hosts

10. Installing VMware ESXi onto Cisco Unified Computing System

  • Important Design Parameters for Successful VMware ESXi SAN Boot onto Cisco UCS
  • ESXi Service Profile to the B-Series
  • Map the VMware ESXi .iso Installer Image
  • Install ESXi
  • Configure the ESXi Management Network Parameters

11. Installing and Configuring VMware vCenter Server, vSphere Client and vSphere Update Manager

  • Important Design Parameters for Successful VMware vCenter, vSphere Client and vSphere
  • Update Manager Installation
  • Install and Configure VMware vCenter Server
  • Add ESXi Hosts to vCenter Server, vSphere Client, and vSphere Update Manager (VUM)
  • Configure Virtual Networking Parameters
  • Map NFS Volumes to ESXi Hosts Using the IBM Storwize GUI

12. Configuring IBM Storwize V7000 File Modules

  • Important Design Parameters for Successful Configuration of IBM Storwize V7000 File Modules
  • Initialize the IBM Storwize V7000 File Modules
  • Delete and Recreate Network Associations that are LACP Compliant
  • Configure IBM Storwize Virtual Port Channels on Nexus 9000 Switches
  • Create and Export an NFS Datastore
  • Add the NFS Volumes to the ESXi Hosts Using vSphere Client

13. Installing the Cisco Nexus 1000V Using the Virtual Switch Update Manager

  • Important Design Parameters for Successful Installation and Configuration of the Cisco Nexus1000V
  • Nexus 1000V Architecture
  • Configure the ESXi Virtual Networking to Accommodate the Nexus 1000V Installation and Connectivity
  • Deploy the Nexus 1000V Virtual Supervisor Module (VSM) Using the .ova Image
  • Install the Nexus 1000V Using the Cisco Virtual Switch Update Manager
  • Configure the Primary VSM Using the NX-OS Command Line Interface
  • Migrate Networking Components for ESXi Hosts to the Nexus 1000V
  • Install the Virtual Ethernet Module (VEM) Onto The ESXi Hosts
  • Validate VSM to VEM Connectivity

14. Review the VersaStack for Data Center Bill of Materials (BOM)

  • IBM Storwize V7000 Storage Platform
  • Cisco Nexus 9300 Series Switch
  • Cisco NDS 9100 Series Fibre Channel Switch
  • Cisco Unified Computing System

Labs

Lab 1: Configuring the Cisco Nexus 9396 Switches

Lab 2: Configuring the Cisco Nexus 9396 LAN Connectivity

Lab 3: Configuring the Cisco Nexus 9396 Switches

Lab 4: Configuring the IBM Storwize Storage System

Lab 5: Perform a Unified Computing System Cluster Reset and Initialization

Lab 6: Configuring Cisco Unified Computing System

Lab 7: Configuring Cisco MDS SAN Parameters

Lab 8: Configuring Cisco MDS SAN Parameters

Lab 9: Configuring Volumes on the Storwize Storage System

Lab 10: Installing VMware ESXi onto Cisco Unified Computing System

Lab 11: Installing and Configuring VMware vCenter Server, vSphere Client and

Lab 12: Configuring IBM Storwize V7000 File Modules

Lab 13: Installing the Cisco Nexus 1000V Using the Virtual Switch Update Manager



Eğitim içeriğini PDF olarak indir